Charge LiPo, LiOn, LiFe, NiMh, NiCd, Pb Batteries w/ 80 Watts of Power!
If you have been searching for just one RC battery charger to handle all of your charging needs, look no further than the GT Power X6. This charger is DC powered so it can be plugged into a power supply or powered from your car battery out in the field. This machine can handle charging, discharging, balancing (LiPO/LiON/LiFE cells), cycling, battery resistance measurements, and much more. And your charge options are remembered by the charger so it is quick and easy to plug it in and start charging right away. It also features a large readout for displaying charge/discharge graphic curves and much more.

High Power Output = Faster Charges
The X6 has 80 Watts of total circuit power. Watts = Voltage x Amps. This means that you can charge your high voltage batteries at a higher amp rate with this charger. This equals faster charge times and less waiting around. To calculate the max charge rate, divide the Watt Power of the Charger by the Voltage of your Battery Pack. See the examples below:

Battery Size: 50 Watt Charger 80 Watt Charger
2S 7.4V LiPo
3S 11.1V LiPo
4S 14.8V LiPo
5S 18.5V LiPo
6S 22.2V LiPo

Charge 2 Batteries at Once
The X6 has enough power to efficiently charge 2 batteries at once. Using a “Twins” Charging Adapter from GT Power, you can charge two 2S 7.4V LiPo packs or even two 3S 11.1V LiPo packs at one time! You can also charge two NiMh batteries at once using a series connection. (Please note that charging two batteries at once functions best when batteries are of equal size mAh and equally discharged.)

High-power and high-performance circuitry
The X6 employs a circuit that has a maximum output power of 80W. As a result it can charge or discharge up to 17 cells of NiCd/NiMH and 6 series of Lithium (LiPo, LiIo, LiFe) batteries with a maximum current of 7.0 Amps.

Cell Balancing
An individual cell-voltage balancer is included with the charger. This does not require any extra balancer when charging Lithium batteries (Lilo/LiPo/LiFe) for proper cell voltage balancing. It also balances cells on discharge.


  • Displays charge or discharge curve of voltage and current on backlit LCD Screen
  • Measures the internal resistance of the battery to calculate the performance of the battery
  • Adjustable Voltage Cut-Off
  • 10 Battery Memory
  • Temperature Monitoring Port
  • Individual Cell Monitoring
  • Includes Slow, Normal & Fast Lithium Programs
  • Charges LiPo, LiON, LiFe (1S-6S cells)
  • Charges NiMh, NiCs (1-17 cells)
  • Charges Lead-Acid (2V-20V)
  • Charging, Discharging, Cycling, Balancing (LiPO/LiION/LiFE cells) (1-10 cycles)
  • User definable charge rates from 0.1 amps to 7.0 Amps
  • 80 Watts of Circuit Power
  • Balance Port Built In (Balances 2S-6S Batteries) (Uses Align/E-Flite/CSRC style Balance Plug Port) (Thunder Power adapter available separately)
  • Automatic Cooling Fan
  • Comes with 5 different charging plugs
    1. Traxxas High Current Connector
    2. Dean’s Plug
    3. Tamiya / Molex
    4. Futaba / Receiver
    5. Alligator Clip


Operating Voltage Range: DC 11 – 18V
Circuit Power: Max. 80W for charging, Max. 5W for discharging
Charge Current Range: 0.1 – 7.0A
Discharge Current Range: 0.1 – 1.5A
Current Drain for Balancing:: 300mAh/cell
NiCd/NiMH Battery Cell Count: 1 – 17 Cells
Lithium Battery Cell Count: 1 – 6 Series
Pb Battery Voltage: 1 – 12 Cells
Dimensions: 135mm x 100mm x 24mm
Backlit LCD Display : 128×64 pixels


  • X6 Multi Function Balance Charger
  • Traxxas Charge Lead
  • Dean’s Charge Lead
  • Tamiya / Molex Charge Lead
  • Futaba / Receiver Charge Lead
  • Alligator Clip Charge Lead
  • Manual
  • GT Power Warranty

Equipment Needed: DC Power Supply (INTC23189 or INTC22558 Suggested)
Recommended Accessories: LiPo Safe Charging Bag (GTP1009, GTP1010), Temperature Sensor (GTP1004), Cell Check Battery Voltage Tester (GTP1007, GTP1008)
Optional Equipment: Twins 4S [GTP1002] or Twins 6S [GTP1003] Dual Battery Charger Adapter (Charges 2 LiPo batteries at once.)
Note: Batteries must have Align/E-Flite/CSRC style Balance Plug or an adapter must be used.

Package Weight 1.20 lbs
Package Dimensions 8 × 6 × 2 in


There are no reviews yet.

Be the first to review “X6 High Power (80 Watts) – LiPo, LiIon, LiFe, NiCd, NiMh, Lead-Acid DC Balancing Battery Charger”

Your email address will not be published. Required fields are marked