This product is not currently available or has been discontinued.
This product has been replaced by the EV-Peak CQ3 Charger.
This is the EV-Peak 400Watt Four Port Quad Charger. It can be used with 110V/120V outlets and 220V/240V outlets. The USA & Canada use 120V wall outlets while other countries may use 220-240V wall outlets.
The charger DOES come with a selectable voltage switch, allowing for worldwide compatibility.
Charge FOUR batteries at once! Even if they are not the same chemistry, voltage, or capacity. This charger has 4 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply. The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.
The Q6400AC can output up to 100Watts/10Amps from each port at the same time! Each port is fully independent of each other and has its own dedicated power! Using 100Watts/10Amps on a port in no way limits any of the other ports’ ability to charge to its full potential! Max the charger out by using 100Watts/10Amps on each port at the same time for a total of 400Watts!
EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!
High Power Output:
This charger boasts 100Watts of power per port! Most chargers such as Hitec only offer 50Watts per channel. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a 10Amp charge rate!
Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.
Lithium Cell Check
Check the voltage of a Lithium battery’s cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cells voltage.
Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiIo, LiFe, Pb batteries.
EV-Peak offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.
AC Input voltage AC 110V-120V
DC Input voltage range DC 11.0V-18.0V
Charge current range 0.1A-10.0A
Discharge current range 0.1A-5.0A
Charge power limited 100W x 4
Discharge power limited 10W x 4
Balance current max 500mA
Balance tolerance ±0.01V
NiCd/NiMH battery cell count 1-16cells
Lithium battery types Li-Po, Li-ion, Li-Fe
Lithium battery cell count 1-6 series
Pb battery voltage 2V-20V
mAh Capacity: 100mAh – 25,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
Dimensions 240mm x 192mm x 72mm
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113
Additional/Alternate Balance Boards: GTP1005, GTP1006
Additional Charge Leads (4mm Bullet to desired Plug):
GTP0004 Futaba Plug/Receiver/JST
Temperature Sensor: GTP1004
|Package Weight||5.50 lbs|
|Package Dimensions||12 × 12 × 3 in|
C1-XR (10Amps, 100Watts): LiPo, LiHV, LiIon, LiFe, NiCd, NiMh, Pb AC/DC Multi-Chemistry Balancing Battery Charger w/ Internal Resistance (IR), Terminal Voltage Control (TVC) & Battery Meter