This product is not currently available or has been discontinued.
This is an Open Box item. Generally these are customer returns. Since the exterior shows slight signs of installation/use, it is not considered to be in Brand New condition. So it cannot be sold as Brand New. They have been tested to ensure proper functionality. Get it here at a discounted price!
This is the UltraPower Dual Port Charger. This is the newest version which has 12Amps and 120Watts of power per port. This new version also supports charging LiHV batteries.
It is compatible worldwide with its built in AC Voltage switch. The USA uses 110V wall outlets while other countries may use 220V. It can also be powered by DC power, allowing it to be used out in the field when a wall outlet is not available. It has 2 independent charging ports. They are both capable of 120Watt and 12Amps max output. The built in power supply provides enough power so that you can use each port at its maximum output simultaneously. The charger can also be used as a power supply to power other devices, up to 300Watts! It’s a multi-chemistry charger so it can properly charge LiPo, LiHv, LiIon, LiFe, NiMH, NiCd and Pb (lead acid) batteries. It has a built in Balancer for Lithium type batteries. Each port has its own dedicated power, screen, buttons, 4mm output ports, balance port, temperature sensor port, and PC link port. As an added bonus, the charger has a 5V 2.1A USB port built into it to power and recharge your cell phone, tablet, etc.
Charge two batteries at once, even if they are not the same chemistry, voltage, or capacity. This charger has 2 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply. The charger is quite compact at only 180x139x60mm (7×5.5×2.4 inches). So it can store away in your pit bag or box quite easily!
The Charger also features LiPo Balance Charge, LiPo Fast Charge, LiPo Storage, and LiPo Discharge modes.
This charger can charge the latest type of Lithium Batteries on the market, LiHv!
The charger can be used to power other DC devices such as chargers, lathes, lights, etc. It puts out a whopping 300Watts of power! Simply plug the charger into the wall and use the DC port on the right side of the charger to power your device.
UltraPower is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!
High Power Output:
This charger boasts 240Watts of total charging power! Most chargers such as Duratrax only offer 40Watts per channel. Some may even offer 50Watts. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a high 12Amp charge rate.
Lithium Battery Meter
Check the voltage of a Lithium battery’s cells when plugged into the balance port. The screen will provide a readout of each cells voltage, the total pack voltage, as well as the highest and lowest cells.
You can program and store up to 10 different types of battery settings on each port. Then simply load the program to start charging using your stored battery settings.
This charger carries a 90 Day Warranty. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.
AC Input voltage AC 100V-120V OR 220V-240V (Selectable via switch on side of charger)
DC Input voltage DC 11.0V-18.0V
Charge current 0.1A-12.0A
Discharge current 0.1A-5.0A
Charge power max. 120W Each Port
Discharge power max. 10W Each Port
Balance current max. 300mA/cell
Lithium battery cell count 1-6 (S)eries
NiCd/NiMH battery cell count 1-15 Cells
Lithium battery types Li-Po, LiHv, Li-ion, Li-Fe
Pb battery voltage 2V-20V (1-10 cells)
mAh Capacity: 100mAh – 50,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
Dimensions 180 x 139 x 60mm
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113
Additional Charge Leads (4mm Bullet to desired Plug):
GTP0004 Futaba Plug/Receiver/JST
GTP0005 HXT 4.0 Redcat
GTP0007 Multi Charge Leads
GTP0010 Tamiya Mini
GTP0011 Airsoft (Tamiya Mini w/ reversed polarity)
Temperature Sensor: GTP1004 or SKY600040-01
|Package Weight||3.50 lbs|
|Package Dimensions||10 × 9 × 3 in|
|Charger Battery Chemistry|
|Charger Cables Included|
|Charger Max Amperage|
|Charger Power Input|
C1-XR (10Amps, 100Watts): LiPo, LiHV, LiIon, LiFe, NiCd, NiMh, Pb AC/DC Multi-Chemistry Balancing Battery Charger w/ Internal Resistance (IR), Terminal Voltage Control (TVC) & Battery Meter