SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch eliminating the problems associated with intermittent contact of an ordinary mechanical switch. The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided servo tape. (Two kinds of bottom covers are included.) The switch also features a LiPo mode. By turning this on the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over-discharging. The switch can also be used as normal if you’re using a NiMH/NiCd battery or you have other safeguards in place for your LiPo battery. The LED light on the switch also informs you about the remaining capacity of your battery pack.

Functions:

NiMH/NiCd Battery Pack
For switching ON with NiMH mode, press and hold the button for one second. The POWER LED will turn on. For switching OFF, press and hold the button until all LEDs turn off. The POWER LED also shows you the remaining battery capacity when switched on.

NiMH Mode

LiPo Battery Pack
For switching ON with LiPo mode, press and hold the button for more than three seconds. The POWER LED and LIPO LED will turn on. For switching OFF, press and hold the button until all LEDs turn off. The POWER LED also shows you the remaining battery capacity when switched on.

LiPo Mode

Specifications:

  • Input Voltage: 4-12V
  • Max. Current: 10 Amp
  • Battery Mode:
    1. NiHM / NiCad
    2. LiPo
  • Low Voltage Protection: 6.2V(LiPo)
  • Operating temperature: 0-50℃
  • Weight: ≤7g
Package Weight .05 lbs
Package Dimensions 5.1 × 3.7 × 0.8 in

Reviews

There are no reviews yet.

Be the first to review “NiMH/LiPo Power Switch w/ 2S LiPo Battery Safety Cutoff (Low Voltage Protection) and Capacity Indicator LED, for Nitro Vehicles”

Your email address will not be published. Required fields are marked