This is the HT206AC/DC from HTRC. It accept 110V-240V so it can be used worldwide on standard wall sockets

LiHV Battery Support
This high-end charger supports the new LiHV chemistry battery! Charge, discharge and storage charge your LiHV’s

Convenience:
Charge two batteries at once. Even if they are not the same chemistry, voltage, or capacity. This charger has 2 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply. The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.

4.3″ Color Touch Screen
This large touch screen makes setting up your charge parameters a breeze. It can be controlled using the touch of your finger or also using a stylus. Simply touch something and adjust the value, very easy and quick to use.

High Power:
The HT06AC/DC can output up to 200Watts/20Amps from each port at the same time! Each port is fully independent of each other and has its own dedicated power! Using 200Watts/20Amps on a port in no way limits any of the other port’s ability to charge to its full potential! Max the charger out by using 200Watts/20Amps on each port at the same time for a total of 400Watts!

The wattage can also be adjusted in the settings menu to offer up to 300Watts to a single port. This will allow you to charge your high voltage batteries even faster!

Lithium Battery Automatic Cell Count Detection:
The charger will automatically sense the battery cell count for lithium battery packs when balance charging. As soon as the battery’s balance plug is connected, the charger detects the cell count and applies it to the charger screen.

Menu Options:

  • LiPo, LiHV, LiFe & LiIon Menus
    • Storage Charge
      • Battery Cell Count (Manually Set)
      • End Voltage
        • LiPo: 3.800V/Cell – 3.900V/Cell (3.850V/Cell Default)
        • LiHV: 3.000V/Cell – 3.900V/Cell (3.900V/Cell Default)
        • LiFe: 3.300V/Cell – 3.400V/Cell (3.350V/Cell Default)
        • LiIon: 3.700V/Cell – 3.800V/Cell (3.750V/Cell Default)
      • Charge Current (0.1A – 20.0A)
      • Discharge Current (0.1A – 5.0A)
      • Save (Store Battery Settings)
    • Charge
      • Battery Cell Count (Manually Set)
      • End Voltage
        • LiPo: 3.850V/Cell – 4.350V/Cell (4.200V/Cell Default)
        • LiHV: 4.300V/Cell – 4.450V/Cell (4.350V/Cell Default)
        • LiFe: 3.300V/Cell – 3.800V/Cell (3.650V/Cell Default)
        • LiIon: 3.750V/Cell – 4.200V/Cell (4.100V/Cell Default)
      • Charge Current (0.1A – 20.0A)
      • Save (Store Battery Settings)
    • Balance Charge
      • Battery Cell Count (Automatically Set by Detecting Battery Through Balance Plug)
      • End Voltage
        • LiPo: 3.850V/Cell – 4.350V/Cell (4.200V/Cell Default)
        • LiHV: 4.300V/Cell – 4.450V/Cell (4.350V/Cell Default)
        • LiFe: 3.300V/Cell – 3.800V/Cell (3.650V/Cell Default)
        • LiIon: 3.750V/Cell – 4.200V/Cell (4.100V/Cell Default)
      • Charge Current (0.1A – 20.0A)
      • Save (Store Battery Settings)
    • Discharge
      • Battery Cell Count (Manually Set)
      • End Voltage
        • LiPo: 3.000V/Cell – 3.850V/Cell (3.200V/Cell Default)
        • LiHV: 3.100V/Cell – 3.900V/Cell (3.300V/Cell Default)
        • LiFe: 2.500V/Cell – 3.300V/Cell (3.000V/Cell Default)
        • LiIon: 3.100V/Cell – 3.750V/Cell (3.100V/Cell Default)
      • Discharge Current (0.1A – 5.0A)
      • Save (Store Battery Settings)
  • NiMH & NiCD Menus
    • Charge
      • Battery Cell Count (1-15 Cells, Auto Default)
      • End Voltage / Peak Sensitivity (4mV/Cell – 20mV/Cell, 4mV/Cell Default)
      • Charge Current (0.1A – 20.0A)
    • Discharge
      • Battery Cell Count (1-15 Cells, Manually Set)
      • End Voltage Per Cell (0.600V/Cell – 1.200V/Cell, 0.800V/Cell Default)
      • Discharge Current (0.1A – 5.0A)
    • Cycle
      • Battery Cell Count (1-15 Cells, Manually Set)
      • End Voltage / Peak Sensitivity (4mV/Cell – 20mV/Cell, 4mV/Cell Default)
      • Charge Current (0.1A – 20.0A)
      • Discharge Current (0.1A – 5.0A)
      • End Voltage Per Cell (0.500V/Cell – 1.200V/Cell)
      • Cycle Delay Time (1min – 20min)
      • Cycle Order (Discharge>Charge or Charge>Discharge)
      • Cycle Count (1-5 Times)
  • Pb (Lead Acid) Menu
    • Trickle
      • Battery Cell Count (1-10 Cells, Manually Set)
      • End Voltage (1.800V/Cell – 2.500V/Cell, 2.450V/Cell Default)
      • Charge Current (0.1A – 20.0A)
    • Charge
      • Battery Cell Count (1-10 Cells, Manually Set)
      • End Voltage (1.800V/Cell – 2.500V/Cell, 2.400V/Cell Default)
      • Charge Current (0.1A – 20.0A)
    • Discharge
      • Battery Cell Count (1-10 Cells, Manually Set)
      • End Voltage (1.500V/Cell – 1.800V/Cell, 1.500V/Cell Default)
      • Discharge Current (0.1A – 5.0A)
  • Smart Battery Menu
    • Smart Battery I (11.1V/3S)
      • Max Voltage: 12.6V
      • Max Current: 4.0A
    • Smart Battery II/IV (15.2V/4S)
      • Max Voltage: 17.4V
      • Max Current: 4.0A
    • Smart Battery III (22.8V/6S)
      • Max Voltage: 26.1V
      • Max Current: 4.0A
    • Digital Power
      • Max Voltage (0.1V – 28.0V)
      • Max Current (0.1A – 20.0A)
  • Settings
    • Public Settings
      • Buzzer Volume (Off, Low, Middle, High)
      • Low Input Voltage Alert (10.0V – 30.0V)
      • Balance Speed (Fast, Normal, Slow)
      • CH1/CH2 Max Power (100W/300W – 300W/100W in 10W Increments, 200W/200W Default)
    • CH1 & CH2 Settings (Can be set independently)
      • Internal Temp Cutoff (30°C – 85°C, 80°C Default)
      • External Temp Sensor Cutoff (30°C – 85°C, 60°C Default)
      • Capacity Cutoff (Off, 0.1Ah – 5.0Ah, 5.0Ah Default)
      • Safety Timer Cutoff (Off, 1min – 600min, 240min Default)
  • Memory Menu
    • Access, Edit and Use up to 8 stored battery profiles
  • Monitor Menu
    • Shows Voltage Readings for Each Cell in Lithium Battery to 0.001V Resolution
    • IR Measures Internal Resistance of each cell
    • Balance will balance the cells within a Lithium pack without the need to charge the battery

Warranty:
HTRC offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.

Specifications:

AC Input voltage AC 120V-240V
DC Input voltage range DC 10.0V-30.0V
Charge current range 0.1A-20.0A* per port
Discharge current range 0.1A-5.0A* per port
Charge power limited 200Watts per port
Discharge power limited 25W per port
Balance Current 500mA/cell
Digital DC Power 5.0V – 28.0V, 0.1A – 20.0A
NiCd/NiMH battery cell count 1-15cells
Lithium battery types Li-Po, Li-HV, Li-ion, Li-Fe
Lithium battery cell count 1-6 series
Pb battery voltage 2V-20V
Smart Battery I/II/III
Dimensions 7.7 x 5.6 x 2.8 inches, 195 x 143 x 70 mm
Weight 2.4lb, 1.1 Kg

* The charger has a 20A or 200W limit per port. The charger is limited to whichever is reached first, Amps or Watts. The charger will auto-adjust the amperage if the max wattage is reached. For example, charging a 4S LiPo: 200Watts ÷ 14.8Volts = approx. 13.5Amp max charge rate.

Includes:

  • HT206 Duo Charger
  • AC Power Cord
  • DC Power Cord (4mm Bullet to XT60)
  • 2x XT60 to XT60/Deans T-Plug Charge Cables
  • 2x JST-XH Balance Boards
  • Instructional Manual
  • HTRC Warranty

Recommended Items:
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113

XT60 Charging Adapters:
GTPH0601 XT60 to Deans Style T-Plug
GTPH0602 XT60 to Traxxas TRX Style Plug
GTPH0603 XT60 to Tamiya / Molex / Kyosho / Standard
GTPH0605 XT60 to HXT4.0 4mm Bullet (Redcat)
GTPH0608 XT60 to EC3/IC3
GTPH0609 XT60 to EC5/IC5
GTPH0616 XT60 to XT90

Balance Plug Extensions (Easier LiPo Safe Bag Charging):
GTP1202 2S Balance Plug Extension
GTP1203 3S Balance Plug Extension
GTP1204 4S Balance Plug Extension
GTP1205 4S Balance Plug Extension
GTP1206 4S Balance Plug Extension

Temperature Sensor: GTP1004, SKY600040-01

Package Weight 3.60 lbs
Package Dimensions 10.5 × 8.0 × 3.5 in
Charger Battery Chemistry

, , , , , , ,

Charger Cables Included

,

Charger Max Amperage

Charger Ports

Charger Power (AC)

Charger Power Input

, ,

Charger Screen

Reviews

There are no reviews yet.

Be the first to review “HT206 Duo Dual Port 2-Channel Color Touch Screen (20Amps / 200Watts Per Port, 400Watts Total): LiPo, LiHV, LiIon, LiFe, NiCd, NiMh, Pb, Smart I II III, AC/DC Balancing Battery Multicharger”

Your email address will not be published. Required fields are marked

Product Enquiry