This is the HTRC C150. It provides a very high power output while maintaining the convenience of AC/DC power options. It has all the latest features such as LiHV charging, Terminal Voltage Control, Internal Resistance Testing, Cell Balancing, Digital Power Output, Smart Battery Charging as well as a 2.1V USB port for charging your cell phone or powering a pit light.

LiHV Battery Support
This high-end charger supports the new LiHV chemistry battery! Charge, discharge and storage charge your LiHV’s

Smart Battery Support
The charger can charge Smart Batteries I, II & III which are used in mainly in Drones and Aircrafts.

Convenience:
This charger plugs directly into the wall and is compatible worldwide with an AC voltage range of 110-240V. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply.
The Charger also features Lithium Balance Charge, Lithium Storage, and Lithium Discharge modes (for LiPo, LiHV, LiFe, Li-Ion).
A USB port is located on the front of the charger which allows you to power a pit light or recharge your mobile phone!

Reliability:
HTRC is known for their great reliability. (They are the OEM manufacturer for many of today’s top US charger brands.) They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 10Amps & 150Watts of power when connected to AC or DC power! Most chargers only offer about 50Watts which can limit the charge rate of your battery, especially when charging LiPo batteries above 2S 7.4V. This charger leaves other chargers in the dust, allowing your packs to charge faster!

Terminal Voltage Control / Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiHV, LiIo, LiFe batteries.

Lithium Voltage Meter
Check the voltage of a Lithium battery’s cells when plugged into the balance port. The charger, without the need to enter the charging mode, will allow you to view each cell’s voltage.

Internal Resistance Check:
You can also view your battery’s internal resistance, indicating the performance of your battery pack.

Menu Options:

  • Lithium Battery (LiPo, LiHV, LiFe, Li-Ion)
    • Balance Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: Auto detect will set the battery voltage once the balance plug is connected
    • Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1S-6S Adjustable
    • Fast Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1S-6S Adjustable
        In this mode the charger will charge the battery to the terminal voltage that is set and will stop at 1/5 of the current setting, resulting in a faster charge that is not 100% full.
    • Storage
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1S-6S Adjustable
    • Discharge
      • Current: 0.1A-2.0A* Adjustable
      • Voltage: 1S-6S Adjustable
    • Terminal Voltage Control (TVC) for Charge and Discharge can be adjusted in the Settings Menu.
  • NiMH & NiCd Batteries
    • Charge
      • Current: 0.1A-10.0A* Adjustable
    • Discharge
      • Current: 0.1A-2.0A* Adjustable
      • Voltage: 1-15 Cells Adjustable
    • Cycle
      • Charge > Discharge or Discharge > Charge
      • Times: 1-5 Cycles Adjustable
  • Pb Lead Acid Batteries
    • Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1-10 Cells Adjustable
    • Discharge
      • Current: 0.1A-2.0A* Adjustable
      • Voltage: 1-10 Cells Adjustable
  • Extra Functions
    1. Lithium Battery Meter: Displays Battery Total Voltage, Each Cell’s Voltage and Battery Charge Percentage
    2. Lithium Battery IR Internal Resistance
    3. Lithium Battery Balancer: Balances the cells in the battery without having to start a charge process.
    4. Digital Power
      • 5.0V-27.0V Adjustable
      • 0.1A-10.0A Adjustable
    5. Smart Battery Charge
      • Charge Time: 1min-240min Adjustable
      • Current: 1.0A-10.0A Adjustable
      • Voltage: 5.0V-27.0V Adjustable
  • Load Memory
    • The charger has 20 memory profiles.
    • It also displays your last used settings as ‘LS’ in this menu.
    • Scroll to the memory profile that you would like to use or edit.
    • Press Enter to Load the profile.
    • Press Enter to make adjustments or Long-Press Enter to start the charging profile.
  • User Settings Menu
    • Key Beep: On or Off
    • Buzzer Volume: Off, Low, Mid or High
    • Completion Ring Beep: Off, Always or 1min-5min Adjustable
    • Waste Time between cycles: 1min-60min Adjustable, 5min Default
    • Input Voltage Cutoff: 10.0A-18.0A Adjustable, 10.0A Default
    • External Temperature Cutoff: Off or 30°C-90°C Adjustable, 60°C Default
    • Capacity Cutoff: Off or 100mAh-60,000mAh Adjustable, 8,000mAh Default
    • Safety Timer: Off or 10min-720min Adjustable, 240min Default
    • Max Charge Power: 10W-150W Adjustable, 150Watt Default
    • Balance Control: Fast, Standard or Accurate
    • TVC – Terminal Voltage Control
      • LiPo Charge: 4.150V-4.250V, 4.20V Default
      • LiPo Discharge: 3.000V-3.850V, 3.20V Default
      • LiHV Charge: 4.300V-4.400V, 4.35V Default
      • LiHV Discharge: 3.000V-3.950V, 3.30V Default
      • Li-Ion Charge: 3.750-4.200V, 4.10V Default
      • Li-Ion Discharge: 3.000V-3.750V, 3.10V Default
      • LiFe Charge: 3.300V-3.800V, 3.65V Default
      • LiFe Discharge: 2.500V-3.300V, 2.50V Default
      • NiMH Delta Peak Sensitivity: Default or 5mV-20mV Adjustable
        This is the change/drop in voltage that must occur in order for the charger to conclude that the Nickel battery is fully charged. If your battery is ‘false peaking’ then increase this value, or charge at a low amperage for a few cycles.
      • NiMH Discharge: 0.5V-1.0V, 0.8V Default
      • NiCd Delta Peak Sensitivity: Default or 5mV-20mV Adjustable
        This is the change/drop in voltage that must occur in order for the charger to conclude that the Nickel battery is fully charged. If your battery is ‘false peaking’ then increase this value, or charge at a low amperage for a few cycles.
      • NiCd Discharge: 0.5V-1.0V, 1.0V Default
      • Pb Charge: 1.50V-2.50V, 2.40V Default
      • Pb Discharge: 1.00V-1.50V. 1.50V Default
    • Reset Factory Default Settings: Returns all settings and memory profiles to default settings from the factory.

Warranty:
HTRC offers a great 1 Year warranty on their chargers. This warranty covers manufacturer’s defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.

Specifications:

AC Input voltage AC 110V-240V Auto-switching Power Supply
DC Input voltage DC 11.0V-18.0V
Charge current 0.1A-10.0A
Discharge current 0.1A-2.0A
Max Charge Power (AC/DC): 150Watts
Discharge power max. 10Watts
NiCd/NiMH battery cell count 1-15cells
Lithium battery types Li-Po, Li-Hv, Li-ion, Li-Fe
Lithium battery cell count 1 – 6 Cells in Series (1S-6S) per port
Pb battery voltage 2.4V-20V
Weight 15.4oz / 438g
Dimensions 5.7 x 4.1 x 2.6 inches / 145 x 105 x 65mm

* The charger has 10A or 150W limit. The charger is limited to whichever is reached first, Amps or Watts. The charger will auto-adjust the amperage if the max wattage is reached. For example, charging a 6S LiPo: 150Watts / 22.2Volts = approx. 6.7Amp max charge rate.
* Similarly, discharging is limited to whichever threshold is met first, Amps or Watts.

Includes:

  • C150 Duo AC/DC Charger
  • AC Power Cord
  • DC Power Cord (XT60 to Alligator Clips)
  • Deans T-Plug Charging Cable
  • Deans to XT60 Charging Adapter
  • Deans to Tamiya Charging Adapter
  • Deans to Alligator Clip Charging Adapter
  • JST-XH 2S-6S Balance Board
  • Instructional Manual
  • HTRC Warranty

Notes:

  • The charger has 10A or 150W limit. The charger is limited to whichever is reached first, Amps or Watts. The charger will auto-adjust the amperage if the max wattage is reached. For example, charging a 6S LiPo: 150Watts / 22.2Volts = approx. 6.7Amp max charge rate.
  • Similarly, discharging is limited to whichever threshold is met first, Amps or Watts.

Recommended Items:
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113

Additional Charge Leads (4mm Bullet to desired Plug):
GTP0001 Deans
GTP0002 Traxxas
GTP0003 Tamiya/Molex
GTP0004 Futaba Plug/Receiver
GTP0005 HXT 4.0mm Redcat
GTP0006 XT60
GTP0007 Multi Charge Cable (Deans, Traxxas, Rx etc..)
GTP0008 EC3
GTP0009 EC5
GTP0010 Tamiya Mini
GTP0011 Airsoft
GTP0013 HXT3.5mm Walkera Style
GTP0014 JST
GTP0015 HXT3.5mm SYMA Style
GTP0016 XT90

Temperature Sensor: GTP1004, SKY600040-01

Cell Check Battery Voltage Tester
GTP1002 Twins 4S or GTP1003 Twins 6S Dual Battery Charger Adapter (Charges 2 LiPo batteries at once.)

Package Weight 1.80 lbs
Package Dimensions 8.6 × 6.0 × 3.0 in
Charger Battery Chemistry

, , , , , , ,

Charger Cables Included

, , ,

Charger Max Amperage

Charger Ports

Charger Power (AC)

Charger Power Input

, ,

Charger Screen

Reviews

There are no reviews yet.

Be the first to review “C150 (10Amps, 150Watts): LiPo, LiHV, LiFe, Li-Ion, NiMH, NiCd, Pb, Smart I/II/III 2S-6S AC/DC Balancing Battery Charger w/ Deans T-Plug, XT-60, Tamiya, JST-XH Balance Board”

Your email address will not be published. Required fields are marked

Product Enquiry