Description:

This is the HTRC HT100 Touch Screen 10Amp 100Watt Multi-Chemistry Charger. Lots of Power & Features at an Incredible Price!
Make no mistake. Despite its affordability, it offers today’s most advanced charging features, capabilities & reliability!

Traxxas ID Version:
This charger package includes the Charging Cable needed to balance charge Traxxas ID 2S & 3S batteries. Compared to Traxxas’ ID Chargers, the HT100 offers faster recharge times, a more affordable price and a 1 year warranty (instead of just 30 days from Traxxas). Also included is a Dean’s T-Plug and XT60 Charge cable so that you can charge standard type batteries as well!

LiHV Battery Support
This high-end charger supports the new LiHV chemistry battery! Charge, discharge and storage charge your LiHV’s

Smart Battery Support
The charger can charge Smart Batteries I, II & III which are used in mainly in Drones and Aircrafts.

Universal Balance Board
Don’t stress about being able to connect your battery’s balance plug. This charger comes complete with a universal balance board that accepts just about every balance tap on the market. (JST-XH, TP/FP, EH, HP/PQ)

Convenience:
This charger plugs directly into the wall and is compatible worldwide with an AC voltage range of 110-240V. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply.
The Charger also features Lithium Balance Charge, Lithium Storage, and Lithium Discharge modes (for LiPo, LiHV, LiFe, Li-Ion).

Reliability:
HTRC is known for their great reliability. (They are the OEM manufacturer for many of today’s top US charger brands.) They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 10Amps & 100Watts of power! Most chargers only offer about 50Watts which can limit the charge rate of your battery, especially when charging LiPo batteries above 2S 7.4V. This charger leaves other chargers in the dust, allowing your packs to charge faster!

Terminal Voltage Control / Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiHV, LiIo, LiFe batteries.

Lithium Voltage Meter
Check the voltage of a Lithium battery’s cells when plugged into the balance port. The charger, without the need to enter the charging mode, will allow you to view each cell’s voltage.

Internal Resistance Check:
You can also view your battery’s internal resistance, indicating the performance of your battery pack.

Menu Options:

  • LiPo, LiHV, LiFe, Li-Ion Batteries
    • Balance Charge
      • Cells: Auto Detect (will set cell count based once balance plug is connected)
      • Current: 0.1A-10.0A Adjustable
      • TVC (Terminal Voltage Control)
        • LiPO: 3.85V-4.35V, 4.20V Default
        • LiHV: 4.35V-4.65V, 4.35V Default
        • LiFe: 3.30V-4.35V 3.65V Default
        • Li-Ion: 3.75V-4.20V, 4.10V Default
    • Charge
      • Cells: 1S-6S Adjustable (will auto detect and set cell count if balance plug is connected)
      • Current: 0.1A-10.0A Adjustable
      • TVC (Terminal Voltage Control)
    • Storage
      • Cells: 1S-6S Adjustable (will auto detect and set cell count if balance plug is connected)
      • Current: 0.1A-10.0A* Adjustable
        * Note that if the cell voltage is above storage voltage, the battery will be discharged in order to bring it to the storage level. Discharging is limited to 10Watts which will affect your max discharge amperage. (Amperage=Watts/Volts) Example w/ a 2S LiPo battery: Amperage = 10W / 7.4V = 1.35A max discharge rate.
      • TVC (Terminal Voltage Control)
    • Discharge
      • Cells: 1S-6S Adjustable (will auto detect and set cell count if balance plug is connected)
      • Current: 0.1A-5.0A* Adjustable
        * Discharging is limited to 10Watts which will affect your max discharge amperage. (Amperage=Watts/Volts) Example w/ a 2S LiPo battery: Amperage = 10W / 7.4V = 1.35A max discharge rate.
      • TVC (Terminal Voltage Control)
  • NiMH, NiCd Batteries
    • Charge
      • Cells: 1-18 Cells Adjustable
      • Current: 0.1A-10.0A Adjustable
      • Delta Peak: 4mV-20mV Adjustable, 4mV Default
        This is the change/drop in voltage that must occur in order for the charger to conclude that the Nickel battery is fully charged. If your battery is ‘false peaking’ then increase this value.
    • Cycle
      • Cells: 1-18 Cells Adjustable
      • Current (Charge/Discharge): 0.1A-10.0A* Adjustable
        * Discharging is limited to 10Watts which will affect your max discharge amperage. (Amperage=Watts/Volts) Example w/ a 2S LiPo battery: Amperage = 10W / 7.2V = 1.38A max discharge rate.
      • Order: Charge > Discharge or Discharge > Charge
      • Times: 1x-5x cycles Adjustable
    • Discharge
      • Cells: 1-18 Cells Adjustable
      • Current: 0.1A-5.0A* Adjustable
        * Discharging is limited to 10Watts which will affect your max discharge amperage. (Amperage=Watts/Volts) Example w/ a 6S NiMH battery: Amperage = 10W / 7.2V = 1.38A max discharge rate.
      • TVC (Terminal Voltage Control): 600mV-1200mV, 800mV Default
  • Pb Lead Acid Batteries
    • Charge
      • Cells: 1-12 Cells Adjustable
      • Current: 0.1A-10.0A Adjustable
      • TVC (Terminal Voltage Control): 1.50V-2.50V, 2.40V Default
    • Trickle
      • Cells: 1-12 Cells Adjustable
      • Current: 0.1A-10.0A Adjustable
      • TVC (Terminal Voltage Control): 1.50V-2.50V, 2.40V Default
    • Discharge
      • Cells: 1-12 Cells Adjustable
      • Current: 0.1A-5.0A Adjustable
        * Discharging is limited to 10Watts which will affect your max discharge amperage. (Amperage=Watts/Volts) Example w/ a 12V battery: Amperage = 10W / 12V = 0.83A max discharge rate.
      • TVC (Terminal Voltage Control): 1.00V-2.00V, 1.50V Default
  • Smart Battery
    • Target Voltage: 5.0V-28.0V Adjustable, 17.4V Default
    • Max Current: 0.1A-10.0A Adjustable
    • Max Power: 10W-100W Adjustable
    • Safety Timer: Off or 1min-600min Adjustable, 240min Default
  • Memory
    • Saving to Memory
      • When setting up the charger to charge a battery in the previous menus listed above, pressing Start once brings you to the ‘Save Profile’ screen where you can save the profile you just created to 1 of the 8 memory locations.
      • Simply select the memory location and press Save in order to save the profile to memory.
      • You would then simply press Start again to start the charge process.
    • Retrieving and using a saved profile
      • The profiles that you have saved can be accessed from the main menu by pressing Memory.
      • Simply scroll left or right to select the profile you want. The details about the profile such as Battery Type, Mode, Current and TVC are shown on the screen for easy recognition.
      • You have the option to Modify or Start the charge profile from here simply by pressing the corresponding button.
  • Monitor
    • Main Screen
      • Input Voltage
      • Battery Voltage
      • Internal Charger Temperature
      • External Temperature of your battery (Temp Sensor sold separately)
    • Cells
      • Voltage of each cell
      • Voltage Difference
      • IR Internal Resistance
    • Balance
      • This will balance the cells in a pack without having to start a charge.
  • Settings Menu
    • LCD Backlight: 30%-80% Adjustable
    • LCD Contrast: 30%-60% Adjustable
    • Touch Sounds: On or Off
    • Buzzer Volume: Off, Low, Mid or High
    • Input Voltage Cutoff: 10.0A-18.0A Adjustable, 10.0A Default
    • Capacity Cutoff: Off or 100mAh-50,000mAh Adjustable, 10,000mAh Default
    • Safety Timer: Off or 1min-600min Adjustable, 240min Default
    • Internal Temperature Cutoff: 30°C-90°C Adjustable, 80°C Default
    • External Temperature Cutoff: 30°C-90°C Adjustable, 60°C Default
    • Waste Time between cycles: 1min-60min Adjustable, 5min Default
    • Max Charge Power: 10W-100W Adjustable, 100Watt Default
    • Balance Control: Fast, Standard or Accurate
    • Load Factory Defaults: Returns all settings and memory profiles to default settings from the factory.

Warranty:
HTRC offers a great 1 Year warranty on their chargers. This warranty covers manufacturer’s defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.

Specifications:

AC Input voltage AC 110V-240V Auto-switching Power Supply
DC Input voltage DC 11.0V-18.0V
Charge current 0.1A-10.0A*
Discharge current 0.1A-2.0A*
Charge power max. 100W
Discharge power max. 10W
NiCd/NiMH battery cell count 1-18cells
Lithium battery types Li-Po, Li-Hv, Li-ion, Li-Fe
Lithium battery cell count 1 – 6 Cells in Series (1S-6S)
Pb battery voltage 2.4V-24V
Weight 16.7oz / 1.04lbs / 476g
Dimensions 5.5 x 4.8 x 2.1 inches / 139 x 122 x 53mm
* Charger has 10A/100W limit, whichever is reached first. Charger will auto-adjust the amperage if the max wattage is reached. For example, charging a 4S LiPo: 100Watts / 14.8Volts = approx. 6.7Amp max charge rate.

Includes:

  • HT100 Touch Screen AC/DC Charger
  • AC Power Cord
  • DC Power Cord (XT60 to Alligator Clips)
  • Traxxas ID 2S/3S Charge Cable
  • Deans T-Plug Charge Cable
  • XT60 Charge Cable
  • Universal Balance Board (JST-XH, TP/FP, EH, HP/PQ)
  • Instructional Manual
  • HTRC Warranty

Recommended Items:
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113

Additional Charge Leads (4mm Bullet to desired Plug):
GTP0001 Deans
GTP0002 Traxxas
GTP0003 Tamiya/Molex
GTP0004 Futaba Plug/Receiver
GTP0005 HXT 4.0mm Redcat
GTP0006 XT60
GTP0007 Multi Charge Cable (Deans, Traxxas, Rx etc..)
GTP0008 EC3
GTP0009 EC5
GTP0010 Tamiya Mini
GTP0011 Airsoft
GTP0013 HXT3.5mm Walkera Style
GTP0014 JST
GTP0015 HXT3.5mm SYMA Style
GTP0016 XT90

Temperature Sensor: GTP1004, SKY600040-01

Package Weight 2 lbs
Package Dimensions 8.3 × 6.5 × 2.7 in

Reviews

There are no reviews yet.

Be the first to review “HT100 TRAXXAS ID 2S-3S Touch Screen (10Amps, 100Watts): LiPo, LiHV, LiFe, Li-Ion, NiMH, NiCd, Pb, Smart I/II/III 2S-6S AC/DC Balancing Battery Charger w/ Traxxas ID 2S/3S, Deans T-Plug & XT60 Cables + Universal Balance Board (JST-XH, TP/FP, EH, HP/PQ) HT-01”

Your email address will not be published. Required fields are marked