Description:

This is the HTRC H120 Duo Dual Port 10Amp Multi-Chemistry Charger. Lots of Power & Features at an Incredible Price!
Make no mistake. Despite its affordability, it offers today’s most advanced charging features, capabilities & reliability!

AIR Version:
This charger package includes extra charging adapters that are commonly used with drones, heli’s and planes such as the Deans T-Plug, XT60, EC3, Tamiya/Molex Mini & HXT3.5mm Walkera plugs.

LiHV Battery Support
This high-end charger supports the new LiHV chemistry battery! Charge, discharge and storage charge your LiHV’s

Smart Battery Support
The charger can charge Smart Batteries I, II & III which are used in mainly in Drones and Aircrafts.

Convenience:
This charger plugs directly into the wall and is compatible worldwide with an AC voltage range of 110-240V. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply.
Two Charging Ports makes recharging multiple packs a breeze! This is great for vehicles that use 2 battery packs at the same time. And you even can charge two completely different types of batteries on each port at the same time.
The Charger also features Lithium Balance Charge, Lithium Storage, and Lithium Discharge modes (for LiPo, LiHV, LiFe, Li-Ion).
A USB port is located on the side of the charger which allows you to recharge your mobile phone or tablet!

Reliability:
HTRC is known for their great reliability. (They are the OEM manufacturer for many of today’s top US charger brands.) They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 10Amps & 100Watts of power per port when connected to DC power! Most chargers only offer about 50Watts which can limit the charge rate of your battery, especially when charging LiPo batteries above 2S 7.4V. This charger leaves other chargers in the dust, allowing your packs to charge faster!

Terminal Voltage Control / Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiHV, LiIo, LiFe batteries.

Lithium Voltage Meter
Check the voltage of a Lithium battery’s cells when plugged into the balance port. The charger, without the need to enter the charging mode, will allow you to view each cell’s voltage.

Internal Resistance Check:
You can also view your battery’s internal resistance, indicating the performance of your battery pack.

Menu Options:

  • Lithium Battery (LiPo, LiHV, LiFe, Li-Ion)
    • Balance Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: Auto detect will set the battery voltage once the balance plug is connected
    • Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1S-6S Adjustable
    • Fast Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1S-6S Adjustable
        In this mode the charger will charge the battery to the terminal voltage that is set and will stop at 1/5 of the current setting, resulting in a faster charge that is not 100% full.
    • Storage
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1S-6S Adjustable
    • Discharge
      • Current: 0.1A-2.0A* Adjustable
      • Voltage: 1S-6S Adjustable
    • Terminal Voltage Control (TVC) for Charge and Discharge can be adjusted in the Settings Menu.
  • NiMH & NiCd Batteries
    • Charge
      • Current: 0.1A-10.0A* Adjustable
    • Discharge
      • Current: 0.1A-2.0A* Adjustable
      • Voltage: 1-15 Cells Adjustable
    • Cycle
      • Charge > Discharge or Discharge > Charge
      • Times: 1-5 Cycles Adjustable
  • Pb Lead Acid Batteries
    • Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1-10 Cells Adjustable
    • Charge
      • Current: 0.1A-2.0A* Adjustable
      • Voltage: 1-10 Cells Adjustable
  • Extra Functions
    1. Lithium Battery Meter: Displays Battery Total Voltage, Each Cell’s Voltage and Battery Charge Percentage
    2. Lithium Battery IR Internal Resistance
    3. Lithium Battery Balancer: Balances the cells in the battery without having to start a charge process.
    4. Digital Power
      • 5.0V-27.0V Adjustable
      • 0.1A-10.0A Adjustable
    5. Smart Battery Charge
      • Charge Time: 1min-240min Adjustable
      • Current: 1.0A-10.0A Adjustable
      • Voltage: 5.0V-27.0V Adjustable
  • Load Memory
    • The charger has 20 memory profiles per port.
    • It also displays your last used settings as ‘LS’ in this menu.
    • Scroll to the memory profile that you would like to use or edit.
    • Press Enter to Load the profile.
    • Press Enter to make adjustments or Long-Press Enter to start the charging profile.
  • User Settings Menu
    • Key Beep: On or Off
    • Buzzer Volume: Off, Low, Mid or High
    • Completion Ring Beep: Off, Always or 1min-5min Adjustable
    • Waste Time between cycles: 1min-60min Adjustable, 5min Default
    • Input Voltage Cutoff: 10.0A-18.0A Adjustable, 10.0A Default
    • External Temperature Cutoff: Off or 30°C-90°C Adjustable, 60°C Default
    • Capacity Cutoff: Off or 100mAh-60,000mAh Adjustable, 5,000mAh Default
    • Safety Timer: Off or 10min-720min Adjustable, 240min Default
    • Max Charge Power: 10W-100W Adjustable, 100Watt Default
    • Balance Control: Fast, Standard or Accurate
    • TVC – Terminal Voltage Control
      • LiPo Charge: 4.150V-4.250V, 4.20V Default
      • LiPo Discharge: 3.000V-3.850V, 3.20V Default
      • LiHV Charge: 4.300V-4.400V, 4.35V Default
      • LiHV Discharge: 3.000V-3.950V, 3.30V Default
      • Li-Ion Charge: 3.750-4.200V, 4.10V Default
      • Li-Ion Discharge: 3.000V-3.750V, 3.10V Default
      • LiFe Charge: 3.300V-3.800V, 3.65V Default
      • LiFe Discharge: 2.500V-3.300V, 2.50V Default
      • NiMH Delta Peak Sensitivity: Default or 5mV-20mV Adjustable
        This is the change/drop in voltage that must occur in order for the charger to conclude that the Nickel battery is fully charged. If your battery is ‘false peaking’ then increase this value.
      • NiMH Discharge: 0.5V-1.0V, 0.8V Default
      • NiCd Delta Peak Sensitivity: Default or 5mV-20mV Adjustable
        This is the change/drop in voltage that must occur in order for the charger to conclude that the Nickel battery is fully charged. If your battery is ‘false peaking’ then increase this value.
      • NiCd Discharge: 0.5V-1.0V, 0.8V Default
      • Pb Charge: 1.50V-2.50V, 2.40V Default
      • Pb Discharge: 1.00V-1.50V. 1.50V Default
    • Reset Factory Default Settings: Returns all settings and memory profiles to default settings from the factory.

Warranty:
HTRC offers a great 1 Year warranty on their chargers. This warranty covers manufacturer’s defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.

Specifications:

AC Input voltage AC 110V-240V Auto-switching Power Supply
DC Input voltage DC 11.0V-18.0V
Charge current 0.1A-10.0A* per port
Discharge current 0.1A-2.0A* per port
Port 1 Max Charge Power AC: 70Watts
Port 2 Max Charge Power AC: 50Watts
Port 1 Max Charge Power DC: 100Watts
Port 2 Max Charge Power DC: 100Watts
Discharge power max. 10W per port
NiCd/NiMH battery cell count 1-15cells
Lithium battery types Li-Po, Li-Hv, Li-ion, Li-Fe
Lithium battery cell count 1 – 6 Cells in Series (1S-6S)
Pb battery voltage 2.4V-24V
Weight 27.0oz / 1.69lbs / 766g
Dimensions 6.7 x 4.8 x 2.2 inches / 170 x 122 x 56mm

Includes:

  • H120 Duo AC/DC Charger
  • AC Power Cord
  • DC Power Cord (XT60 to 4mm Bullet Male Plugs)
  • 2x Deans T-Plug / XT60 Charge Cables
  • Deans to EC3 Adapter Cable
  • Deans to Tamiya/Molex Mini Adapter Cable
  • Deans to HXT3.5mm Walkera Adapter Cable
  • 2x JST-XH 2S-6S Balance Boards
  • Instructional Manual
  • HTRC Warranty

Notes:

* The charger has 10A or 100W limit per port when connected to DC power. It has a 10A or 70W/50W limit when connected to AC power. The charger is limited to whichever is reached first, Amps or Watts. The charger will auto-adjust the amperage if the max wattage is reached. For example, charging a 4S LiPo: 100Watts / 14.8Volts = approx. 6.7Amp max charge rate.

Recommended Items:
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113

Additional Charge Leads (4mm Bullet to desired Plug):
GTP0001 Deans
GTP0002 Traxxas
GTP0003 Tamiya/Molex
GTP0004 Futaba Plug/Receiver
GTP0005 HXT 4.0mm Redcat
GTP0006 XT60
GTP0007 Multi Charge Cable (Deans, Traxxas, Rx etc..)
GTP0008 EC3
GTP0009 EC5
GTP0010 Tamiya Mini
GTP0011 Airsoft
GTP0013 HXT3.5mm Walkera Style
GTP0014 JST
GTP0015 HXT3.5mm SYMA Style
GTP0016 XT90

Temperature Sensor: GTP1004, SKY600040-01

DC Alligator Clips w/ 4mm Bullet Holes: GTP1340

Package Weight 2.95 lbs
Package Dimensions 9.2 × 8.4 × 2.7 in

Reviews

There are no reviews yet.

Be the first to review “H120 Duo AIR (10Amps Each Port, 120Watts AC, 200Watts DC): LiPo, LiHV, LiFe, Li-Ion, NiMH, NiCd, Pb, Smart I/II/III Dual Port 2S-6S AC/DC Balancing Battery Charger w/ Deans T-Plug, XT60, EC3, Tamiya/Molex Mini & HXT3.5mm Walkera Cables + 2x JST-XH Balance Boards”

Your email address will not be published. Required fields are marked