This product is not currently available or has been discontinued.
Charge LiPo, LiOn, LiFe, NiMh, NiCd, Pb Batteries w/ 80 Watts of Power!
If you have been searching for just one RC battery charger to handle all of your charging needs, look no further than the GT Power X6. This charger is DC powered so it can be plugged into a power supply or powered from your car battery out in the field. This machine can handle charging, discharging, balancing (LiPO/LiON/LiFE cells), cycling, battery resistance measurements, and much more. And your charge options are remembered by the charger so it is quick and easy to plug it in and start charging right away. It also features a large readout for displaying charge/discharge graphic curves and much more.
High Power Output = Faster Charges
The X6 has 80 Watts of total circuit power. Watts = Voltage x Amps. This means that you can charge your high voltage batteries at a higher amp rate with this charger. This equals faster charge times and less waiting around. To calculate the max charge rate, divide the Watt Power of the Charger by the Voltage of your Battery Pack. See the examples below:
|Battery Size:||50 Watt Charger||80 Watt Charger|
|2S 7.4V LiPo||
|3S 11.1V LiPo||
|4S 14.8V LiPo||
|5S 18.5V LiPo||
|6S 22.2V LiPo||
Charge 2 Batteries at Once
The X6 has enough power to efficiently charge 2 batteries at once. Using a “Twins” Charging Adapter from GT Power, you can charge two 2S 7.4V LiPo packs or even two 3S 11.1V LiPo packs at one time! You can also charge two NiMh batteries at once using a series connection. (Please note that charging two batteries at once functions best when batteries are of equal size mAh and equally discharged.)
High-power and high-performance circuitry
The X6 employs a circuit that has a maximum output power of 80W. As a result it can charge or discharge up to 17 cells of NiCd/NiMH and 6 series of Lithium (LiPo, LiIo, LiFe) batteries with a maximum current of 7.0 Amps.
An individual cell-voltage balancer is included with the charger. This does not require any extra balancer when charging Lithium batteries (Lilo/LiPo/LiFe) for proper cell voltage balancing. It also balances cells on discharge.
Operating Voltage Range: DC 11 – 18V
Circuit Power: Max. 80W for charging, Max. 5W for discharging
Charge Current Range: 0.1 – 7.0A
Discharge Current Range: 0.1 – 1.5A
Current Drain for Balancing:: 300mAh/cell
NiCd/NiMH Battery Cell Count: 1 – 17 Cells
Lithium Battery Cell Count: 1 – 6 Series
Pb Battery Voltage: 1 – 12 Cells
Dimensions: 135mm x 100mm x 24mm
Backlit LCD Display : 128×64 pixels
Equipment Needed: DC Power Supply (INTC23189 or INTC22558 Suggested)
Recommended Accessories: LiPo Safe Charging Bag (GTP1009, GTP1010), Temperature Sensor (GTP1004), Cell Check Battery Voltage Tester (GTP1007, GTP1008)
Optional Equipment: Twins 4S [GTP1002] or Twins 6S [GTP1003] Dual Battery Charger Adapter (Charges 2 LiPo batteries at once.)
Note: Batteries must have Align/E-Flite/CSRC style Balance Plug or an adapter must be used.
|Package Weight||1.20 lbs|
|Package Dimensions||8 × 6 × 2 in|
C1-XR CAR (10Amps, 100Watts): LiPo, LiHV, LiIon, LiFe, NiCd, NiMh, Pb AC/DC Multi-Chemistry Balancing Battery Charger w/ Internal Resistance (IR), Terminal Voltage Control (TVC) & Battery Meter (Deans Traxxas Tamiya HXT4.0mm Redcat EC3 Plugs)