Description:

This charger has been replaced by the upgraded version, the EV-Peak CQ3

This is the EV-Peak 400Watt Four Port Quad Charger, 220V-240V Version. The charger has a selectable voltage switch so it can be used worldwide. But the switch will come preset to the 220V-240V setting.

Convenience:
Charge FOUR batteries at once! Even if they are not the same chemistry, voltage, or capacity. This charger has 4 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply. The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.

High Power:
The Q6400AC can output up to 100Watts/10Amps from each port at the same time! Each port is fully independent of each other and has its own dedicated power! Using 100Watts/10Amps on a port in no way limits any of the other ports’ ability to charge to its full potential! Max the charger out by using 100Watts/10Amps on each port at the same time for a total of 400Watts!

Reliability:
EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 100Watts of power per port! Most chargers such as Hitec only offer 50Watts per channel. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a 10Amp charge rate!

Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.

Lithium Cell Check
Check the voltage of a Lithium battery’s cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cell’s voltage.

Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiIo, LiFe, Pb batteries.

Menu Options:

  • LiPo Battery, LiIon Battery, LiFe Battery
    • Charge (Final Cell Voltage is Adjustable in User Settings. LiPo 4.00V-4.30V. LiIo 3.90V-4.20V. LiFe 3.40V-3.90V)
    • Balance Charge (Balances cells inside of battery for optimal performance & safety)
    • Storage Mode (Brings battery to approx. half charge, best for long term non-use)
    • Discharge (Final Cell Voltage is Adjustable. LiPo 3.0V-4.0V. LiIo 3.0V-4.0V. LiFe 2.0V-3.0V)
  • NiMh
    • Manual Charge (Manually set charge amperage)
    • Auto Charge (Set amperage limit, charger will auto adjust)
    • Discharge (Voltage adjustable from 0.1V-24.0V)
    • Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
  • NiCd
    • Manual Charge (Manually set charge amperage)
    • Auto Charge (Set amperage limit, charger will auto adjust)
    • Discharge (Voltage adjustable from 0.1V-24.0V)
    • Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
  • Pb (Lead Acid batteries such as the battery in your car)
    • Charge
    • Discharge
  • Digital Power
    • Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power.
    • Amperage adjustable from 0.1A-10.0A
    • Voltage Adjustable from 3.0V-24.0V
  • User Settings
    • Precharge Time
    • Wait Time (between charge & discharge cycles, 1-60min)
    • NiMh Peak Sensitivity
    • NiCd Peak Sensitivity
    • Temp Cutoff
    • Safety Timer
    • Capacity Cutoff
    • Input Power Low Voltage Cutoff
    • Key Beep and Buzzer Sound (On or Off)
    • Back Light (0%-100%)
    • Battery End Voltage (Adjust the voltage that the Charger will stop charging at, per cell)
      • LiPo: 4.00V-4.30V (4.20V Default)
      • LiIo: 3.90V-4.20V (4.10V Default)
      • LiFe: 3.40V-3.90V (3.60V Default)
      • Pb: 2.20V-2.50V (2.40V Default)
    • Factory Reset

Warranty:
EV-Peak offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.

Specifications:

AC Input voltage AC 220V-240V
DC Input voltage range DC 11.0V-18.0V
Charge current range 0.1A-10.0A
Discharge current range 0.1A-5.0A
Charge power limited 100W x 4
Discharge power limited 10W x 4
Balance current max 500mA
Balance tolerance ±0.01V
NiCd/NiMH battery cell count 1-16cells
Lithium battery types Li-Po, Li-ion, Li-Fe
Lithium battery cell count 1-6 series
Pb battery voltage 2V-20V
mAh Capacity: 100mAh – 25,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
Dimensions 240mm x 192mm x 72mm

Includes:

  • Q6400AC 4 Port Charger, 220V-240V Version
  • AC Power Cord
  • DC Power Cord
  • 2x JST-XH Balance Boards
  • 2x DC Power Cord Clips
  • Charge Leads
    • Alligator Clips
    • Futaba/Rx
    • JST
    • Bare Leads
  • Instructional Manual
  • EV-Peak Warranty

Notes:

Recommended Items:
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113

Additional/Alternate Balance Boards: GTP1005, GTP1006

Additional Charge Leads (4mm Bullet to desired Plug):
GTP0001 Deans

GTP0002 Traxxas
GTP0003 Tamiya/Molex
GTP0004 Futaba Plug/Receiver/JST

Temperature Sensor: GTP1004

Package Weight 5.50 lbs
Package Dimensions 12 × 12 × 3 in

2 reviews for Q6400AC 240V Four-Channel 4 Port (10Amps, 400Watts): LiPo, LiIon, LiFe, NiCd, NiMh, Pb AC/DC Balancing Battery Multicharger

  1. Arnold Morgan

    I have had the charger only for a few weeks now, but what I have used shows that it rocks! This product charges my batteries in half the time my other Hitec charger did, and it has all the bells and whistles you’ll ever need. Thanks for an awesome charger guys!
    -Arnold

  2. Dmitrijs Vladimirovs

    I thank you for this charger. The ship time was very fast from the US. The charger has many options that are not found on other chargers. It does everything you need for LiPo batteries. Thank you again friends!

Add a review

Your email address will not be published. Required fields are marked

Product Enquiry