Description:

This is the EV-Peak Four Port Quad Charger, 220V-240V Version.

Convenience:
Charge FOUR batteries at once! Even if they are not the same chemistry, voltage, or capacity. This charger has 4 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply.
The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.

High Power:
The Q320AC can output up to 80Watts/7Amps from each port at the same time! Each port is fully independent of each other and has its own dedicated power! Using 80Watts/7Amps on a port in no way limits any of the other ports’ ability to charge to its full potential! Max the charger out by using 80Watts/7Amps on each port at the same time for a total of 320Watts!

Reliability:
EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 80Watts of power per port! Most chargers such as Hitec only offer 50Watts per channel. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a 7Amp charge rate!

Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.

Lithium Cell Check
Check the voltage of a Lithium battery’s cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cell’s voltage.

Menu Options:

  • LiPo Battery, LiIon Battery, LiFe Battery
    • Charge
    • Balance Charge (Balances cells inside of battery for optimal performance & safety)
    • Storage Mode (Brings battery to approx. half charge, best for long term non-use)
    • Discharge (Final Cell Voltage is Adjustable. LiPo 3.0V-4.0V. LiIo 3.0V-4.0V. LiFe 2.0V-3.0V)
  • NiMh
    • Manual Charge (Manually set charge amperage)
    • Auto Charge (Set amperage limit, charger will auto adjust)
    • Discharge (Voltage adjustable from 0.1V-24.0V)
    • Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
  • NiCd
    • Manual Charge (Manually set charge amperage)
    • Auto Charge (Set amperage limit, charger will auto adjust)
    • Discharge (Voltage adjustable from 0.1V-24.0V)
    • Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
  • Pb (Lead Acid batteries such as the battery in your car)
    • Charge
    • Discharge
  • Digital Power
    • Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power.
    • Amperage adjustable from 0.1A-7.0A
    • Voltage Adjustable from 3.0V-24.0V
  • User Settings
    • Precharge Time
    • Wait Time (between charge & discharge cycles, 1-60min)
    • NiMh Peak Sensitivity
    • NiCd Peak Sensitivity
    • Temp Cutoff
    • Safety Timer
    • Capacity Cutoff
    • Input Power Low Voltage Cutoff
    • Key Beep and Buzzer Sound (On or Off)
    • Back Light (0%-100%)
    • Factory Reset

Warranty:
EV-Peak offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.

Specifications:

AC Input voltage AC 220V-240V
DC Input voltage range DC 11.0V-18.0V
Charge current range 0.1A-7.0A
Discharge current range 0.1A-2.0A
Charge power limited 80W x 4
Discharge power limited 10W x 4
Balance current max.500mA
Balance tolerance ±0.01V
NiCd/NiMH battery cell count 1-16cells
Lithium battery types Li-Po, Li-ion, Li-Fe
Lithium battery cell count 1-6 series
Pb battery voltage 2V-20V
mAh Capacity: 100mAh – 25,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
Dimensions 240mm x 223mm x 67mm

Includes:

  • Q6320AC 4 Port Charger (240V Version)
  • AC Power Cord
  • DC Power Cord
  • 2x JST-XH Balance Boards
  • 2x DC Power Cord Clips
  • Charge Leads
    • Alligator Clips
    • Futaba/Rx
    • JST
    • Bare Leads
  • Instructional Manual
  • EV-Peak Warranty

Notes:

Recommended Items:
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113

Additional/Alternate Balance Boards: GTP1005, GTP1006

Additional Charge Leads (4mm Bullet to desired Plug):
GTP0001 Deans

GTP0002 Traxxas
GTP0003 Tamiya/Molex
GTP0004 Futaba Plug/Receiver/JST

Temperature Sensor: GTP1004

Package Weight 5.50 lbs
Package Dimensions 12 × 12 × 3 in

2 reviews for Q6320AC 240V Four-Channel 4 Port (7Amps, 320Watts): LiPo, LiIon, LiFe, NiCd, NiMh, Pb AC/DC Balancing Battery Multicharger

  1. Yong Lee

    My charger arrived and works great. Thank you. This is a good trade.

  2. Walter Pickering

    It is great to deal with these guys. The charger works great, too.

Add a review

Your email address will not be published. Required fields are marked

Product Enquiry