Description:

This is the EV-Peak Dual Port Charger, 220V-240V Version. The charger has a selectable voltage switch so it can be used worldwide, even with 110-120V outlets. But the switch will come preset to the 220V-240V setting for ease of set up and use.

Convenience:
Charge two batteries at once. Even if they are not the same chemistry, voltage, or capacity. This charger has 2 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply.
The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.

Reliability:
EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 100Watts of power per port! Most chargers such as Duratrax only offer 40Watts per channel. Some may even offer 50Watts. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a 8Amp charge rate.

Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.

Lithium Cell Check
Check the voltage of a Lithium battery’s cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cell’s voltage.

Menu Options:

  • LiPo Battery, LiIon Battery, LiFe Battery
    • Charge
    • Balance Charge (Balances cells inside of battery while charging for optimal performance & safety)
    • Storage Mode (Brings battery to approx. half charge, best for long term non-use)
    • Discharge (Final Cell Voltage is Adjustable. LiPo 3.0V-4.0V. LiIo 3.0V-4.0V. LiFe 2.0V-3.0V)
  • NiMh
    • Manual Charge (Manually set charge amperage)
    • Auto Charge (Set amperage limit, charger will auto adjust)
    • Discharge (Voltage adjustable from 0.1V-24.0V)
    • Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
  • NiCd
    • Manual Charge (Manually set charge amperage)
    • Auto Charge (Set amperage limit, charger will auto adjust)
    • Discharge (Voltage adjustable from 0.1V-24.0V)
    • Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
  • Pb (Lead Acid batteries such as the battery in your car)
    • Charge
    • Discharge
  • Digital Power
    • Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power.
    • Amperage adjustable from 0.1A-8.0A
    • Voltage Adjustable from 0.1V-24.0V
  • User Settings
    • Precharge Time
    • Wait Time (between charge & discharge cycles, 1-60min)
    • NiMh Peak Sensitivity
    • NiCd Peak Sensitivity
    • Temp Cutoff
    • Safety Timer
    • Capacity Cutoff
    • Input Power Low Voltage Cutoff
    • Key Beep and Buzzer Sound (On or Off)

Warranty:
EV-Peak offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.

Specifications:

AC Input voltage AC 220V-240V
DC Input voltage DC 11.0V-18.0V
Charge current 0.1A-8.0A
Discharge current 0.1A-5.0A
Charge power max.100W x 2
Discharge power max. 20W x 2
Balance current max. 250mA
Balance tolerance ±0.01V
NiCd/NiMH battery cell count 1-16cells
Lithium battery types Li-Po, Li-ion, Li-Fe
Lithium battery cell count 1-6series
Pb battery voltage 2V-20V
Digital Power 3V-24V
mAh Capacity: 100mAh – 25,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
Weight 1250g
Dimensions 208 x 170 x 63mm

Includes:

  • D610AC Dual Charger 220V-240V Version.
  • AC Power Cord
  • DC Power Cord
  • 2x JST-XH Balance Boards
  • 2x DC Power Cord Clips
  • Charge Leads
    • Alligator Clips
    • Tamiya Molex
    • Bare Leads
  • Instructional Manual
  • EV-Peak Warranty

Notes:

Recommended Items:
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113

Additional Charge Leads (4mm Bullet to desired Plug):
GTP0001 Deans

GTP0002 Traxxas
GTP0003 Tamiya/Molex
GTP0004 Futaba Plug/Receiver/JST

Temperature Sensor: GTP1004

Package Weight 4.00 lbs
Package Dimensions 10 × 10 × 3 in

1 review for D610AC 240V Dual Port (2x 8Amps, 2x 100Watts): LiPo, LiIon, LiFe, NiCd, NiMh, Pb AC/DC Balancing Battery Multicharger

  1. Godovanec Nikolay

    This is a good deal, a great product, and I received fast shipping. Thank you!

Add a review

Your email address will not be published. Required fields are marked