This product is not currently available or has been discontinued.
This is the EV-Peak CD3 400Watt Dual Port Charger. The charger has a selectable voltage switch so it can be used worldwide.
LiHV Battery Support
This high-end charger supports the new LiHV chemistry battery! Charge, discharge and storage charge your LiHV’s
Charge two batteries at once. Even if they are not the same chemistry, voltage, or capacity. This charger has 2 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply. The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.
The CD3 can output up to 200Watts/25Amps from each port at the same time! Each port is fully independent of each other and has its own dedicated power! Using 200Watts/25Amps on a port in no way limits any of the other port’s ability to charge to its full potential! Max the charger out by using 200Watts/25Amps on each port at the same time for a total of 400Watts!
Touch Screen Interface:
The very user friendly touch screen makes using this unit a breeze. The screen is large and bright. It can be controlled using the touch of your finger or also using the included stylus. Simply touch something and adjust the value, very easy and quick to use.
EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!
High Power Output:
This charger boasts 200Watts of power per port! Most chargers such as Hitec only offer 50-100Watts per channel. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a 25Amp charge rate! It also offers a high 5Amps/30Watts of discharging power. This makes cycling, discharging, and balancing much faster!
Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.
Lithium Cell Check
Check the voltage of a Lithium battery’s cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cells voltage.
Terminal Voltage Control / Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiHV, LiIo, LiFe batteries.
Lithium Voltage Meter & Balance Function
Check the voltage of a Lithium battery’s cells when plugged into the balance port. The charger, without the need to enter the charging mode, will allow you to view each cell’s voltage.
You can even use the charger’s Balance Function to balance an out of balance Lithium battery. No need to charge the battery in order to balance it. You can simply balance your lithium cells on this charger without entering a charge mode.
Internal Resistance Check:
You can also view your battery’s internal resistance, indicating the performance of your battery pack.
EV-Peak offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.
AC Input voltage AC 100V-120V OR 220V-240V (selectable via switch)
DC Input voltage range DC 11.0V-18.0V
Charge current range 0.1A-25.0A per port
Discharge current range 0.1A-5.0A per port
Charge power limited 200W x 2
Discharge power limited 30W x 2
Balance current max 400mA
Balance tolerance ±0.01V
NiCd/NiMH battery cell count 1-16cells
Lithium battery types Li-Po, Li-HV, Li-ion, Li-Fe
Lithium battery cell count 1-6 series
Pb battery voltage 2V-24V
mAh Capacity: 100mAh – 50,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
Dimensions 240mm x 192mm x 65mm
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113
Additional Charge Leads (4mm Bullet to desired Plug):
GTP0004 Futaba Plug/Receiver/JST
GTP0005 HXT 4.0mm Redcat
GTP0007 Multi Charge Cable (Deans, Traxxas, Rx etc..)
GTP0010 Tamiya Mini
Temperature Sensor: GTP1004, SKY600040-01
|Package Weight||5.50 lbs|
|Package Dimensions||12 × 12 × 4 in|
|Charger Battery Chemistry|
|Charger Cables Included|
|Charger Max Amperage|
|Charger Power (AC)|
|Charger Power Input|
C1-XR (10Amps, 100Watts): LiPo, LiHV, LiIon, LiFe, NiCd, NiMh, Pb AC/DC Multi-Chemistry Balancing Battery Charger w/ Internal Resistance (IR), Terminal Voltage Control (TVC) & Battery Meter