This product is not currently available or has been discontinued.
This is the updated version of the very popular EV-Peak D610AC. If you are looking for a charger with 2 screens and the ability to charge LiHV batteries, try the CD1+ Plus. And also check out the AD1 which offers two touch screens and even more options than the CD1+!
This is the EV-Peak Dual Port Charger. The charger has a selectable voltage switch so it can be used worldwide, up to 240V.
Charge two batteries at once. Even if they are not the same chemistry, voltage, or capacity. This charger has 2 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply.
The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.
EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!
High Power Output:
This charger boasts 100Watts of power per port! Most chargers such as Duratrax only offer 40Watts per channel. Some may even offer 50Watts. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a 10Amp charge rate.
Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.
Lithium Cell Check
Check the voltage of a Lithium battery’s cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cells voltage.
Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiIo, LiFe, Pb batteries. (Adjustment values listed below)
EV-Peak offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.
AC Input voltage AC 100V-120V OR 220V-240V (selectable via switch)
DC Input voltage DC 11.0V-18.0V
Charge current 0.1A-10.0A
Discharge current 0.1A-5.0A
Charge power max.100W x 2
Discharge power max. 20W x 2
Balance current max. 250mA
Balance tolerance ±0.01V
NiCd/NiMH battery cell count 1-16cells
Lithium battery types Li-Po, Li-ion, Li-Fe
Lithium battery cell count 1-6series
Pb battery voltage 2V-24V
mAh Capacity: 100mAh – 25,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
Digital Power 3V-24V
Dimensions 204 x 170 x 60mm
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113
Additional Charge Leads (4mm Bullet to desired Plug):
GTP0004 Futaba Plug/Receiver/JST
GTP0005 HXT 4.0mm Redcat
GTP0007 Multi Charge Cable (Deans, Traxxas, Rx etc..)
GTP0010 Tamiya Mini
Temperature Sensor: GTP1004, SKY600040-01
|Package Weight||4.00 lbs|
|Package Dimensions||10 × 10 × 3.5 in|