This is the HTRC C240 Duo. It’s a Dual Port charger that provides a high power output while maintaining the convenience of AC/DC power options. It has all the latest features such as LiHV charging, Terminal Voltage Control, Internal Resistance Testing, Cell Balancing, Digital Power Output and Smart Battery Charging. It offers 150Watts of power when connected to AC such as a wall outlet and a whopping 240Watts when connected to a DC power source such as a 12V car battery.

LiHV Battery Support
This high-end charger supports the new LiHV chemistry battery! Charge, discharge and storage charge your LiHV’s

Smart Battery Support
The charger can charge Smart Batteries I, II & III which are used in mainly in Drones and Aircrafts.

Convenience:
This charger plugs directly into the wall and is compatible worldwide with an AC voltage range of 110-240V. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply.
Two Charging Ports makes recharging multiple packs a breeze! This is great for vehicles that use 2 battery packs at the same time. And you even can charge two completely different types of batteries on each port at the same time.
The Charger also features Lithium Balance Charge, Lithium Storage, and Lithium Discharge modes (for LiPo, LiHV, LiFe, Li-Ion).

Reliability:
HTRC is known for their great reliability. (They are the OEM manufacturer for many of today’s top US charger brands.) They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 10Amps per port. It has 150Watts of power when connected to AC and 240Watts of power when connected to DC! Most chargers only offer about 50Watts which can limit the charge rate of your battery, especially when charging LiPo batteries above 2S 7.4V. This charger leaves other chargers in the dust, allowing your packs to charge faster!

Terminal Voltage Control / Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiHV, LiIo, LiFe batteries.

Lithium Voltage Meter
Check the voltage of a Lithium battery’s cells when plugged into the balance port. The charger, without the need to enter the charging mode, will allow you to view each cell’s voltage.

Internal Resistance Check:
You can also view your battery’s internal resistance, indicating the performance of your battery pack.

Menu Options:

  • Lithium Battery (LiPo, LiHV, LiFe, Li-Ion)
    • Balance Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: Auto detect will set the battery voltage once the balance plug is connected
    • Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1S-6S Adjustable
    • Fast Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1S-6S Adjustable
        In this mode the charger will charge the battery to the terminal voltage that is set and will stop at 1/5 of the current setting, resulting in a faster charge that is not 100% full.
    • Storage
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1S-6S Adjustable
    • Discharge
      • Current: 0.1A-2.0A* Adjustable
      • Voltage: 1S-6S Adjustable
    • Terminal Voltage Control (TVC) for Charge and Discharge can be adjusted in the Settings Menu.
  • NiMH & NiCd Batteries
    • Charge
      • Current: 0.1A-10.0A* Adjustable
    • Discharge
      • Current: 0.1A-2.0A* Adjustable
      • Voltage: 1-15 Cells Adjustable
    • Cycle
      • Charge > Discharge or Discharge > Charge
      • Times: 1-5 Cycles Adjustable
  • Pb Lead Acid Batteries
    • Charge
      • Current: 0.1A-10.0A* Adjustable
      • Voltage: 1-10 Cells Adjustable
    • Discharge
      • Current: 0.1A-2.0A* Adjustable
      • Voltage: 1-10 Cells Adjustable
  • Extra Functions
    1. Lithium Battery Meter: Displays Battery Total Voltage, Each Cell’s Voltage and Battery Charge Percentage
    2. Lithium Battery IR Internal Resistance
    3. Lithium Battery Balancer: Balances the cells in the battery without having to start a charge process.
    4. Digital Power
      • 5.0V-27.0V Adjustable
      • 0.1A-10.0A Adjustable
    5. Smart Battery Charge
      • Charge Time: 1min-240min Adjustable
      • Current: 1.0A-10.0A Adjustable
      • Voltage: 5.0V-27.0V Adjustable
  • Load Memory
    • The charger has 20 memory profiles.
    • It also displays your last used settings as ‘LS’ in this menu.
    • Scroll to the memory profile that you would like to use or edit.
    • Press Enter to Load the profile.
    • Press Enter to make adjustments or Long-Press Enter to start the charging profile.
  • User Settings Menu
    • Key Beep: On or Off
    • Buzzer Volume: Off, Low, Mid or High
    • Completion Ring Beep: Off, Always or 1min-5min Adjustable
    • Waste Time between cycles: 1min-60min Adjustable, 5min Default
    • Input Voltage Cutoff: 10.0A-18.0A Adjustable, 10.0A Default
    • External Temperature Cutoff: Off or 30°C-90°C Adjustable, 60°C Default
    • Capacity Cutoff: Off or 100mAh-60,000mAh Adjustable, 8,000mAh Default
    • Safety Timer: Off or 10min-720min Adjustable, 240min Default
    • AC CH1/CH2 Power (Watts): 50/100 to 100/50 Adjustable, 75/75 Default
    • Balance Control: Fast, Standard or Accurate
    • TVC – Terminal Voltage Control
      • LiPo Charge: 4.150V-4.250V, 4.20V Default
      • LiPo Discharge: 3.000V-3.850V, 3.20V Default
      • LiHV Charge: 4.300V-4.400V, 4.35V Default
      • LiHV Discharge: 3.000V-3.950V, 3.30V Default
      • Li-Ion Charge: 3.750-4.200V, 4.10V Default
      • Li-Ion Discharge: 3.000V-3.750V, 3.10V Default
      • LiFe Charge: 3.300V-3.800V, 3.65V Default
      • LiFe Discharge: 2.500V-3.300V, 2.50V Default
      • NiMH Delta Peak Sensitivity: Default or 5mV-20mV Adjustable
        This is the change/drop in voltage that must occur in order for the charger to conclude that the Nickel battery is fully charged. If your battery is ‘false peaking’ then increase this value, or charge at a low amperage for a few cycles.
      • NiMH Discharge: 0.5V-1.0V, 0.8V Default
      • NiCd Delta Peak Sensitivity: Default or 5mV-20mV Adjustable
        This is the change/drop in voltage that must occur in order for the charger to conclude that the Nickel battery is fully charged. If your battery is ‘false peaking’ then increase this value, or charge at a low amperage for a few cycles.
      • NiCd Discharge: 0.5V-1.0V, 1.0V Default
      • Pb Charge: 1.50V-2.50V, 2.40V Default
      • Pb Discharge: 1.00V-1.50V. 1.50V Default
    • Reset Factory Default Settings: Returns all settings and memory profiles to default settings from the factory.

Warranty:
HTRC offers a great 1 Year warranty on their chargers. This warranty covers manufacturer’s defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.

Specifications:

AC Input voltage AC 110V-240V Auto-switching Power Supply
DC Input voltage DC 11.0V-18.0V
Charge current 0.1A-10.0A* per port
Discharge current 0.1A-2.0A* per port
Max Charge Power (AC): 150Watts Total
Max Charge Power (DC): 240Watts Total
Discharge power max. 10W per port
NiCd/NiMH battery cell count 1-15cells per port
Lithium battery types Li-Po, Li-Hv, Li-ion, Li-Fe
Lithium battery cell count 1 – 6 Cells in Series (1S-6S) per port
Pb battery voltage 2.4V-24V
Weight 17.0oz / 484g
Dimensions 5.7 x 4.1 x 2.6 inches / 145 x 105 x 65mm

* The charger has 10A or 120W limit per port when connected to DC power. It has a 10A or 75W limit per port when connected to AC power. The charger is limited to whichever is reached first, Amps or Watts. The charger will auto-adjust the amperage if the max wattage is reached. For example, charging a 4S LiPo on AC power: 75Watts ÷ 14.8Volts = 5.1Amp max charge rate.
* Similarly, discharging is limited to whichever threshold is met first, Amps or Watts.
* You can also adjust the balance of the 150Watts of total power when connected to AC in the settings menu. This would allow a single port to have up to 100Watts, causing the other port to have 50Watts. At 100Watts, here is an example of charging a 4S LiPo: 100Watts ÷ 14.8V = 6.7Amp max charge rate.

Includes:

  • C240 Duo AC/DC Charger
  • AC Power Cord
  • DC Power Cord (XT60 to Alligator Clips)
  • 2x Deans T-Plug Charging Cables
  • 2x Deans to XT60 Charging Adapters
  • 2x Deans to Tamiya Charging Adapters
  • 2x Deans to Alligator Clip Charging Adapters
  • 2x JST-XH 2S-6S Balance Boards
  • Instructional Manual
  • HTRC Warranty

Notes:

  • The charger has 10A or 120W limit per port when connected to DC power. It has a 10A or 75W limit per port when connected to AC power. The charger is limited to whichever is reached first, Amps or Watts. The charger will auto-adjust the amperage if the max wattage is reached. For example, charging a 4S LiPo on AC power: 75Watts ÷ 14.8Volts = 5.1Amp max charge rate.
  • Similarly, discharging is limited to whichever threshold is met first, Amps or Watts.
  • You can also adjust the balance of the 150Watts of total power when connected to AC in the settings menu. This would allow a single port to have up to 100Watts, causing the other port to have 50Watts. At 100Watts, here is an example of charging a 4S LiPo: 100Watts ÷ 14.8V = 6.7Amp max charge rate.

Recommended Items:
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113

Additional Charge Leads (4mm Bullet to desired Plug):
GTP0001 Deans
GTP0002 Traxxas
GTP0003 Tamiya/Molex
GTP0004 Futaba Plug/Receiver
GTP0005 HXT 4.0mm Redcat
GTP0006 XT60
GTP0007 Multi Charge Cable (Deans, Traxxas, Rx etc..)
GTP0008 EC3
GTP0009 EC5
GTP0010 Tamiya Mini
GTP0011 Airsoft
GTP0013 HXT3.5mm Walkera Style
GTP0014 JST
GTP0015 HXT3.5mm SYMA Style
GTP0016 XT90

Temperature Sensor: GTP1004, SKY600040-01

Cell Check Battery Voltage Tester
Twins 4S or Twins 6SDual Battery Charger Adapter (Charges 2 LiPo batteries at once.)

Package Weight 2.00 lbs
Package Dimensions 8.6 × 6.0 × 3.0 in
Charger Battery Chemistry

, , , , , , ,

Charger Cables Included

, , ,

Charger Max Amperage

Charger Ports

Charger Power (AC)

,

Charger Power Input

, ,

Charger Screen

Reviews

There are no reviews yet.

Be the first to review “C240 Duo (10Amps Each Port, 150Watts AC, 240Watts DC): LiPo, LiHV, LiFe, Li-Ion, NiMH, NiCd, Pb, Smart I/II/III Dual Port 2S-6S AC/DC Balancing Battery Charger w/ Deans T-Plug, XT-60, Tamiya, JST-XH Balance Boards”

Your email address will not be published. Required fields are marked