This is the UltraPower Dual Port Charger with power sharing ability on Port 1. It can borrow power from port 2, using the full power of the charger on a single channel.
It is compatible worldwide with its built in AC Voltage switch. The USA uses 110V wall outlets while other countries may use 220V. It can also be powered by DC power, allowing it to be used out in the field when a wall outlet is not available. It has 2 independent charging ports. They are both capable of 120Watts and 12Amps when used together. The built in power supply provides enough power so that you can use each port at its maximum output simultaneously. The charger can also be used as a power supply to power other devices, up to 300Watts! It’s a multi-chemistry charger so it can properly charge LiPo, LiHv, LiIon, LiFe, NiMH, NiCd and Pb (lead acid) batteries. It has a built in Balancer for Lithium type batteries. Each port has its own dedicated power, screen, buttons, 4mm output ports, balance port, temperature sensor port, and PC link port. As an added bonus, the charger has a 5V 2.1A USB port built into it to power and recharge your cell phone, tablet, etc.
The way it works is quite simple. Each port has a dedicated 120 Watts apportioned to it. But if Port 2 is not using all of its 120Watts, Port 1 can borrow whats left over! Here are some examples of how it works. If you are using 0Watts on Port 2, Port 1 will have all 240Watts available to it. If you are using 50Watts on Port 2, Port 1 will have up to 190Watts available. If you are using the full 120Watts on Port 2, Port 1 will have 120Watts available.
Charge two batteries at once, even if they are not the same chemistry, voltage, or capacity. This charger has 2 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply (DC Power Cable sold separately). The charger is quite compact at only 180x139x60mm (7×5.5×2.4 inches). So it can store away in your pit bag or box quite easily!
The Charger also features LiPo Balance Charge, LiPo Fast Charge, LiPo Storage, and LiPo Discharge modes.
This charger can charge the latest type of Lithium Batteries on the market, LiHV!
The charger can be used to power other DC devices such as chargers, lathes, lights, etc. It puts out a whopping 300Watts of power! Simply plug the charger into the wall and use the DC port on the right side of the charger to power your device.
UltraPower is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!
High Power Output:
This charger boasts 240Watts of total charging power! Most chargers such as Duratrax only offer 40Watts per channel. Some may even offer 50Watts. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a high 20Amp & 12Amp charge rate.
Lithium Battery Meter
Check the voltage of a Lithium battery’s cells when plugged into the balance port. The screen will provide a readout of each cells voltage, the total pack voltage, as well as the highest and lowest cells.
You can program and store up to 10 different types of battery settings on each port. Then simply load the program to start charging using your stored battery settings.
UltraPower offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.
AC Input voltage AC 100V-120V OR 220V-240V (Selectable via switch on side of charger)
DC Input voltage DC 11.0V-18.0V
Charge current Port 1: 0.1A-20.0A, Port 2: 0.1A-12.0A (see power sharing above for more details)
Discharge current 0.1A-5.0A
Charge power max. Port 1: 240W, Port 2: 120W (see power sharing above for more details)
Discharge power max. Port 1: 25W, Port 2: 10W
Balance current max. 500mA/cell
Lithium battery cell count 1-6 (S)eries
NiCd/NiMH battery cell count 1-15 Cells
Lithium battery types Li-Po, LiHv, Li-ion, Li-Fe
Pb battery voltage 2V-20V (1-10 cells)
mAh Capacity: 100mAh – 50,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
Dimensions 180 x 139 x 60mm
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113
DC Power Cable: GTP1306
DC Power Cable 2ft Extension: GTP1300
DC Power Car Battery Clips: GTP1340
Additional Charge Leads (4mm Bullet to desired Plug):
GTP0004 Futaba Plug/Receiver/JST
GTP0005 HXT 4.0 Redcat
GTP0007 Multi Charge Leads
GTP0010 Tamiya Mini
GTP0011 Airsoft (Tamiya Mini w/ reversed polarity)
GTP0012 2S & 3S Traxxas ID Charging Cable
GTP00124 4S Traxxas ID Charging Cable
GTP0013 HXT3.5mm Walkera Style
GTP0015 HXT3.5mm Syma Style
Temperature Sensor: GTP1004 or SKY600040-01
|Package Weight||3.50 lbs|
|Package Dimensions||10.3 x 8.8 x 3 in|