Welcome to Dirt Cheap RC! - Where R/C is Fun and Affordable!
COUPONS: Free US Shipping on Batteries! Codes: Vant: ILLTRYVANT | L&E: ILOVELND | GPR: GETGPR
COUPONS: Free US Shipping on Chargers! Codes: HTRC: SHIP_HTRC | EV-Peak: EVPEAKME | Ultra Power: ULTRASHIP
TIP: Sign-In or Create an Account to see our Exclusive Low Prices.
TIP: Earn RC Points on every order & use them as a discount on your next purchase.
TIP: Join the Waitlist for a backordered product to be notified as soon as it’s available again!
FREE US SHIPPING on ALL orders over $99!
Menu

Description:

This is the EV-Peak AD1 Touch Screen Dual Port Charger. The charger has a selectable voltage switch so it can be used worldwide, up to 240V.

LiHV Battery Support
This high-end charger supports the new LiHV chemistry battery! Charge, discharge and storage charge your LiHV’s

Convenience:
Charge two batteries at once. Even if they are not the same chemistry, voltage, or capacity. This charger has 2 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply.
The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.

Touch Screen Interface:
The very user friendly touch screen makes using this unit a breeze. The screen is large and bright. It can be controlled using the touch of your finger or also using the included stylus. Simply touch something and adjust the value, very easy and quick to use.

Reliability:
EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 10Amps & 100Watts of power! Most chargers only offer about 50Watts which can limit the charge rate of your battery, especially when charging LiPo batteries above just 2S. This charger leaves other chargers in the dust, allowing your packs to charge faster!
It also offers a high 5Amps & 12Watts of discharging power. This makes cycling, discharging, and balancing much faster!

Terminal Voltage Control / Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiHV, LiIo, LiFe batteries.

Digital Power Mode
This charger can also act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.

Lithium Voltage Meter & Balance Function
Check the voltage of a Lithium battery’s cells when plugged into the balance port. The charger, without the need to enter the charging mode, will allow you to view each cell’s voltage.
You can even use the charger’s Balance Function to balance an out of balance Lithium battery. No need to charge the battery in order to balance it. You can simply balance your lithium cells on this charger without entering a charge mode.

Internal Resistance Check:
You can also view your battery’s internal resistance, indicating the performance of your battery pack.

Menu Options:

  • LiPo Battery, LiIon Battery, LiFe Battery, LiHv Battery
    • Charge
      • Voltage: 1S-6S
      • Capacity: 50mAh-50,000mAh
      • Charge Current: 0.1A-10.0A
      • End Voltage:
        • LiPo: 3.80-4.30V/cell Adjustable, 4.20V/cell Default
        • LiIon: 3.80-4.30V/cell Adjustable, 4.10V/cell Default
        • LiFe: 3.30-3.80V/cell Adjustable, 3.60V/cell Default
        • LiHv: 3.85-4.40V/cell Adjustable, 4.35V/cell Default
      • Charge Mode: Balance or No-Balance for LiPo, LiIon, LiFe
    • Discharge
      • Voltage: 1S-6S
      • Capacity: 50mAh-50,000mAh
      • Discharge Current: 0.1A-5.0A
      • End Voltage:
        • LiPo: 3.00-4.20V/cell Adjustable, 3.00V/cell Default
        • LiIon: 3.00-4.10V/cell Adjustable, 3.00V/cell Default
        • LiFe: 2.00-3.60V/cell Adjustable, 2.20V/cell Default
        • LiPo: 3.15-4.35V/cell Adjustable, 3.15V/cell Default
    • Storage Mode (Brings battery to approx. half charge, best for long term non-use)
      • Voltage: 1S-6S
      • Capacity: 50mAh-50,000mAh
      • Discharge Current: 0.1A-5.0A
      • End Voltage:
        • LiPo: 3.70-4.20V/cell Adjustable, 3.70V/cell Default
        • LiIon: 3.60-4.10V/cell Adjustable, 3.60V/cell Default
        • LiFe: 3.30-3.60V/cell Adjustable, 3.30V/cell Default
        • LiHV: 3.85-4.35V/cell Adjustable, 3.85V/cell Default
  • NiMh & NiCd
    • Charge
      • Capacity: 50mAh-50,000mAh
      • Charge Current: 0.1A-10.0A
      • Charge Mode: Manual or Auto
      • Delta Peak: 5-25mV/cell Adjustable, 5mV/cell Default
      • Trickle Current: OFF or 50mA-200mA Adjustable
    • Discharge
      • End Voltage: 0.1V-24.0V Adjustable
      • Capacity: 50mAh-50,000mAh
      • Discharge Current: 0.1A-5.0A
    • Cycle
      • Capacity: 50mAh-50,000mAh
      • Charge Current: 0.1A-10.0A
      • Discharge Current: 0.1A-5.0A
      • Discharge End Voltage: 0.1V-24.0V Adjustable
      • Cycle Mode: Charge>Discharge or Discharge>Charge
      • No. of Cycles: 1-5 Times
      • Delay Timer: 1-60 Minutes
  • Pb (Lead Acid batteries such as the battery in your car)
    • Charge
      • Voltage: 2V/1P – 20V/10P
      • Capacity: 50mAh-50,000mAh
      • Charge Current: 0.1A-10.0A
    • Discharge
      • Voltage: 2V/1P – 20V/10P
      • Capacity: 50mAh-50,000mAh
      • Discharge Current: 0.1A-5.0A
  • Digital Power (Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power)
    • Voltage: 3.0V-24.0V Adjustable
    • Amperage: 0.1A-10A Adjustable
    • Max Power: 1Watt-90Watts Adjustable
  • User Settings
    • Precharge Time: OFF or 1-10Minutes
    • Temp Mode: C or F
    • Temp Cutoff
    • Input Power Low Voltage Cutoff
    • Safety Timer
    • Back Light
    • Full Charge Melody (5 tunes)
    • Key Beep and Buzzer Sound (On or Off)
    • User Name Entry
    • Factory Reset
  • Data View (This allows you to see the data about the charger, a battery connected to the charger, and more)
    • View
      • Input Voltage from power supply source
      • Output Voltage
      • Internal Temp
      • External Temp (via sensor, sold sep.)
      • Resistance: Measured in Milli-Ohms
      • Unit: See the voltage of each Lithium cell connected to the Balance Port
    • Balance: Balance the cells within your LiPo, LiFe, or LiIon battery without charging it.
  • Memory (Save, Load and Delete up to 20 user definable charge settings for different types of batteries)

Warranty:
EV-Peak offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.

Specifications:

AC Input voltage AC 100V-120V OR 220V-240V (selectable via switch)
DC Input voltage DC 11.0V-18.0V
Charge current 0.1A-10.0A
Discharge current 0.1A-5.0A
Charge power max.100W x 2
Discharge power max. 12W x 2
Balance current max. 350mA
Balance tolerance ±0.01V
NiCd/NiMH battery cell count 1-15cells
Lithium battery types Li-Po, Li-ion, Li-Fe, Li-Hv
Lithium battery cell count 1-6series
Pb battery voltage 2V-24V
mAh Capacity: 100mAh – 50,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
Digital Power 3V-24V
Weight 1250g
Dimensions 204 x 170 x 60mm

Includes:

  • AD1 Dual Port Touch Screen Charger
  • AC Power Cord
  • DC Power Cord
  • 2x JST-XH Balance Boards
  • 2x Deans T-Plug Charge Cables
  • Stylus
  • Instructional Manual
  • EV-Peak Warranty

Notes:

Recommended Items:
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113

Additional Charge Leads (4mm Bullet to desired Plug):
GTP0001 Deans
GTP0002 Traxxas
GTP0003 Tamiya/Molex
GTP0004 Futaba Plug/Receiver/JST
GTP0005 HXT 4.0mm Redcat
GTP0006 XT60
GTP0007 Multi Charge Cable (Deans, Traxxas, Rx etc..)
GTP0008 EC3
GTP0009 EC5
GTP0010 Tamiya Mini
GTP00011 Airsoft

Temperature Sensor: GTP1004, SKY600040-01

Package Weight 4.00 lbs
Package Dimensions 11 x 10 x 3.8 in

6 reviews for AD1 Touch Screen Dual Port (2x 10Amps, 2x 100Watts): LiPo, LiHv, LiIon, LiFe, NiCd, NiMh Pb AC/DC Balancing Battery Multicharger

  1. 5 out of 5

    :

    I will park my Hyperion charger never used a touch screen charger set up should be a breeze. Dirtcheaprc has the fastest shipping around with best prices on quality rc products.

  2. 5 out of 5

    :

    Great product at a great price and fast delivery. Thank you.

  3. 5 out of 5

    :

    Charger arrived fast and in great shape. Thank you dirt cheap rc!

  4. 5 out of 5

    :

    Great price. The charger works as described. Plus super fast shipping. Thanks alot

  5. 5 out of 5

    :

    Item as described. Recommend dirtcheaprc as a seller

  6. 5 out of 5

    :

    I received this charger last week. I received fast shipping and it was packed well. I used it yesterday while racing 3 classes. It does a much better job of balance charging my LiPo’s than my old Onyx 245. The touch screens, which I was a little concerned about, worked great! I really like this charger. I have been racing since the late 80’s, and this is the nicest charger I have used.

Add a review

Product Enquiry